[Casper] Network Settings on Standard Images

[Steve Wood]

I'll have to dig around for the information, but you could manage your  
network interfaces using shell scripts that run after imaging the  
system.  Again, I use InstaDMG for my base image, that way the image  
is never booted until it is laid onto the system.  Once you have the  
image on the machine, then push your preference changes to the  
system.  You may even be able to capture the settings using Composer  
and push those plist files to the system.

Just makes it cleaner, in my opinion.

Just my 2 pennies.

Steve Wood
Director, Information Technology
swood at integerdallas.com

The Integer Group | 1999 Bryan St. | Ste. 1700 | Dallas, TX 75201
T 214.758.6813 | F 214.758.6907 | C 940.312.2475




On May 13, 2008, at 12:25 PM, Nicometo, Tim S. wrote:

> Thanks Craig (again).  I like this part of your post...
>
> I think I will try this, test and see how it goes.
>
> tim
>
>
> On 5/13/08 11:32 AM, "Ernst, Craig S." <ERNSTCS at uwec.edu> wrote:
>
>> I include all the required settings for our private network in the  
>> AirPort, but I turn Off the AirPort interface when I’m done  
>> configuring it before creating the image.
>
> -- 
> Tim Nicometo
> Mayo Clinic
> timn at mayo.edu
> (507) 255-3034
> _______________________________________________
> Casper mailing list
> Casper at list.jamfsoftware.com
> http://list.jamfsoftware.com/mailman/listinfo/casper



--
The information contained in this email transmission is solely for the addressee(s) named above and is privileged and/or confidential.  If the reader of this message is not the intended recipient or the person responsible to deliver it to the intended recipient; he or she is prohibited from reading or disclosing the information contained in this transmission.  Any examination, use, dissemination, distribution, or copying of this communication is strictly prohibited.  Please contact us immediately by telephone for instructions if you have received this communication in error: (214) 758-6800
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20080513/1187f08f/attachment.htm