[Casper] Partitioning Macintosh HD during Imaging

[Ryan Harter]

Also if you are netbooted you will need to make sure that you have  
checked "diskless" on your netboot image on the server.  Otherwise it  
uses the local disk for "shadow" files and can't unmount it because it  
is in use.

Ryan Harter
UW - Stevens Point
Workstation Developer
715.346.2716
Ryan.Harter at uwsp.edu

On Nov 6, 2008, at 3:44 PM, Mark Hughes wrote:

> We are setting up images and netbooting across our network.  We have  
> the image part down no problem.
> We are wanting to split up the HD into a OS partition and a data  
> partition.
>
> For some reason the script we are using errors out during the  
> imaging process, however, when
> we run it thru target mode to a machine it works perfectly.  We are  
> imaging eMacs to 10.4.11.
>
> The error from the jss log is as follows:
>
> Result of running split_part.sh was: Partitioning encountered error  
> Could not unmount disk (-10000) on disk disk0
>
> The scripts is as follows:
>
> #!/bin/sh
>
> #create two partitions, one data and one for the OS
>
> /usr/sbin/diskutil partitionDisk disk0 2 HFS+ 'Macintosh HD' 50G HFS 
> + data 23G
>
> echo 'done'
>
> any ideas?
>
> Thanks in advanced....
>
>
> Mark Hughes, Apple Technician
> TIS Department, KCKPS USD500
> Cell 913-449-7791
> mahughe at kckps.org
> _______________________________________________
> Casper mailing list
> Casper at list.jamfsoftware.com
> http://list.jamfsoftware.com/mailman/listinfo/casper

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20081106/90927f5f/attachment.htm