[Casper] software update server, what I am doing wrong?

[Steve Wood]

Another thing to check would be that you have enabled the updates on the SUS
server.  I have mine set to not enable by default so that I don¹t push a
major update before testing.


On 10/21/08 10:27 AM, "Miles Leacy" <miles.leacy at themacadmin.com> wrote:

> Things I'd check:
> 
> Can you manually hit your SUS from your clients via the softwareupdate
> command?
> 
> Is this total failure, or are some machines getting updates?
> 
> Are there pending firmware updates on the failing machines?
> 
> Unfortunately, since firmware updates typically require pressing a physical
> button, they can't be automated.
> 
> 
> 2008/10/21 Thomas Larkin <tlarki at kckps.org>
>>      
>>  
>> 
>>  So, I have a SUS set up with static IP and FQDN, and it resolves and I made
>> it part of the open directory.  In WGM I assigned all groups to the SUS, by
>> IP and when I run software update it shows it connecting to the IP of the
>> server but says no updates found????
>> 
>>        
>> 
>>  I think created a self service casper policy that runs software update by
>> triggering it through the policy tab's built in commands still no dice....
>> 
>>        
>> 
>>  What I am doing wrong?  Anyone?
>> 
>>        
>> 
>>  Thanks in advance
>> 
>>        
>> 
>>  tom 
>>  
>> 
>> _______________________________________________
>> Casper mailing list
>> Casper at list.jamfsoftware.com
>> http://list.jamfsoftware.com/mailman/listinfo/casper
>> 
> 
> 
> 
> _______________________________________________
> Casper mailing list
> Casper at list.jamfsoftware.com
> http://list.jamfsoftware.com/mailman/listinfo/casper

Steve Wood
Director of IT
swood at integerdallas.com

The Integer Group  |  1999 Bryan St.  |  Ste. 1700  |  Dallas, TX 75201
T 214.758.6813  |  F 214.758.6901  |  C 940.312.2475



--
The information contained in this email transmission is solely for the addressee(s) named above and is privileged and/or confidential.  If the reader of this message is not the intended recipient or the person responsible to deliver it to the intended recipient; he or she is prohibited from reading or disclosing the information contained in this transmission.  Any examination, use, dissemination, distribution, or copying of this communication is strictly prohibited.  Please contact us immediately by telephone for instructions if you have received this communication in error: (214) 758-6800
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20081021/4cb6d48f/attachment-0001.htm