[Casper] mass deploying server

[Thomas Larkin]

That is basically what I want to do.  Upon reading on some solutions it
was suggested by an Apple SE to just create an image of the Installer
DVD with disk utility and then mount it on a server.  Then use ARD admin
and use the bless command to netboot it to that volume and then I should
be able to do installs over ARD admin.   

I would also like to create a RAID 1 for the OS as well.  I can use a
script to do that.  I am just trying to automate this so I can image all
30 servers in like one day and then configure them in one day as well so
I can get working on making the end user experience more pleasant for
this next coming school year.


___________________________
Thomas Larkin
TIS Department
KCKPS USD500
tlarki at kckps.org
blackberry:  913-449-7589
office:  913-627-0351





>>> "Dorey, Dustin" <Dustin.Dorey at district196.org> 02/09/09 10:18 AM >>>


If you are using one of the netinstall sets created by the casper
netinstall creater from the resource kit I didn’think you could ARD in? 


We’ve been having issues with that since we were netbooting tons of
machines and then kicking them off in batches remotely with ARD during
our summer imaging.  And with the netinstall set created from the
resource kit we haven’t been able to do that.   Are we just missing
something here? 


-Dusty- 


Dustin  Dorey 


Technology Support Cluster Specialist 


ISD 196 Apple Valley, Eagan, Rosemount 


dustin.dorey at district196.org 


952|423|7971 


From: 

casper-bounces at list.jamfsoftware.com
[mailto:casper-bounces at list.jamfsoftware.com] On Behalf Of Thomas Larkin
Sent: Monday, February 09, 2009 10:08 AM
To: Miles Leacy
Cc: casper at list.jamfsoftware.com
Subject: Re: [Casper] mass deploying server 

  

Do you image them remotely with ARD admin? 




___________________________
Thomas Larkin
TIS Department
KCKPS USD500
tlarki at kckps.org
blackberry:  913-449-7589
office:  913-627-0351





>>> Miles Leacy <miles.leacy at themacadmin.com> 02/09/09 9:58 AM >>>
I am managing servers via Casper. 

  

I have created an OS package/image using Composer after installing Mac
OS X Server, but before configuring any services. 

  

I change the serial number and network settings via serversetup ( found
at /System/Library/ServerSetup/serversetup) and networksetup scripts. 


----------
Miles A. Leacy IV

 Certified System Administrator 10.4
 Certified Technical Coordinator 10.5
 Certified Trainer
Certified Casper Administrator
----------
voice: 1-347-277-7321
miles.leacy at themacadmin.com
www.themacadmin.com




2009/2/9 Thomas Larkin 

<tlarki at kckps.org> 

  


I know this has been asked before but I am looking at different methods
of installing OS X server at our work.  It seems like one of the ways
that on paper may work the best is just creating an image of the
installer DVD and then using the bless command to have the servers
netboot to that image and installing it over ARD admin. 


  

Anyone done this?  Are you using casper?  How do you handle post image
configurations and license serial numbers for the OS X Server? 


  

thanks 



___________________________
Thomas Larkin
TIS Department
KCKPS USD500
tlarki at kckps.org
blackberry:  913-449-7589
office:  913-627-0351






_______________________________________________
Casper mailing list
Casper at list.jamfsoftware.com
http://list.jamfsoftware.com/mailman/listinfo/casper 

  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20090209/dc124c15/attachment.html