[Casper] Dual-Boot partitioning

[NATHANIEL.LINDLEY at spps.org]

Here is what I figured out so far.  You can't adjust partition size in 
Casper Imaging (that I've found).   We have used different scripts in the 
past, but are trying to native tools for this.





From:
"Chad Brewer" <chad.brewer at bend.k12.or.us>
To:
NATHANIEL.LINDLEY at spps.org
Cc:
Casper List <casper at list.jamfsoftware.com>
Date:
07/20/2009 02:14 PM
Subject:
Re: [Casper] Dual-Boot partitioning
Sent by:
casper-bounces at list.jamfsoftware.com



I'm using a winclone image with just a regular configuration (not using an 
additional partition).  Just use Disk util to create the Windows partition 
at whatever size you want, then lay the image down directly to that 
Windows partition.


NATHANIEL.LINDLEY at spps.org on July 20, 2009 at 9:40 AM -0700 wrote:
I'm working with Casper Imaging version 7 and the Casper Admin tool allows 
you to set second partitions for Dual-Boot.  You can set a size and % of 
drive.   then a Winclone image for that 2nd partition. 
However, I don't see a way in Casper Imaging (when NetBooted) to adjust 
the partition size at the time of imaging.    Say the configuration was 
set to 32GB - 35% of drive and I want 50% for a particular computer.   Can 
I adjust the partition size in Casper Imaging, or will I need to setup 
multiple configs in CasperAdmin for different partition sizes? 




Nathaniel Lindley

++++++++++++++++++
Information Technology
Saint Paul Public Schools
Saint Paul, Minnesota
nathaniel.lindley at spps.org
phone:  651-248-6861_______________________________________________
Casper mailing list
Casper at list.jamfsoftware.com
http://list.jamfsoftware.com/mailman/listinfo/casper
_______________________________________________
Casper mailing list
Casper at list.jamfsoftware.com
http://list.jamfsoftware.com/mailman/listinfo/casper

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20090720/4d275b9c/attachment.html