[Casper] Casper Imaging failing to load on Netinstall for one machine

[Ernst, Craig S.]

Hardware problem?

On 6/23/09 1:03 PM, "Dorey, Dustin" <Dustin.Dorey at district196.org> wrote:

I have a 17" intel iMac that I cannot get to load Casper Imaging on via netbooted to a Netinstall set created from JAMF's tools.   It will Netboot, load the OS and as soon as Casper Imaging goes to load it hangs on initializing, every once in a while it will get to checking packages.

Other intels netboot to the same server and install set properly.
I have removed the computer from the JSS
I zeroed the HD
I imaged it in Target boot mode just fine.
I upgraded the firmware
Moved it to an entirely different subnet on known good connections at a different building.

I'm out of ideas.   Any advice? Thanks!
-Dusty-

Dustin  Dorey
Technology Support Cluster Specialist
Independant School District 196
Rosemount-Apple Valley-Eagan Public Schools
dustin.dorey at district196.org
651|423|7971


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20090623/2b164b98/attachment.html