[Casper] Casper Imaging failing to load on Netinstall for one machine

[James Alcasid]

I was thinking the same thing. Might be a bad sector that may need to be
remapped via Disk Utility.


James Alcasíd, ACSA | VeriSolv Technologies
Department of Veterans Affairs | Enterprise Infrastructure Engineering
470 L¹Enfant Plaza Suite 3100, Washington DC 20024
Office (202) 245-4573, Mobile (703) 400-1471







From: "Ernst, Craig S." <ERNSTCS at uwec.edu>
Date: Tue, 23 Jun 2009 14:28:14 -0400
To: "Dorey, Dustin" <Dustin.Dorey at district196.org>, Casper List
<casper at list.jamfsoftware.com>
Subject: Re: [Casper] Casper Imaging failing to load on Netinstall for one
machine

Hardware problem?

On 6/23/09 1:03 PM, "Dorey, Dustin" <Dustin.Dorey at district196.org> wrote:

> I have a 17² intel iMac that I cannot get to load Casper Imaging on via
> netbooted to a Netinstall set created from JAMF¹s tools.   It will Netboot,
> load the OS and as soon as Casper Imaging goes to load it hangs on
> initializing, every once in a while it will get to checking packages.
>  
> Other intels netboot to the same server and install set properly.
> I have removed the computer from the JSS
> I zeroed the HD
> I imaged it in Target boot mode just fine.
> I upgraded the firmware
> Moved it to an entirely different subnet on known good connections at a
> different building.
>  
> I¹m out of ideas.   Any advice? Thanks!
> -Dusty-
>  
> Dustin  Dorey
> Technology Support Cluster Specialist
> Independant School District 196
> Rosemount-Apple Valley-Eagan Public Schools
> dustin.dorey at district196.org
> 651|423|7971
>  
> 


_______________________________________________
Casper mailing list
Casper at list.jamfsoftware.com
http://list.jamfsoftware.com/mailman/listinfo/casper




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20090623/5efbbec3/attachment.html