[Casper] authenticating..

[Dorey, Dustin]

What do you mean revert?   Do you have more than one distribution point?
If not it shouldn't matter if the fileserver shows up there.  If it does
matter you'll need to mass edit your groups depending on which share you
want each to point at i.e. if each building had a share then you could
edit it that way.     I don't think there is a way to just do a
edit>undo or anything like that.

-Dusty-

Dustin  Dorey

Technology Support Cluster Specialist

Independant School District 196

Rosemount-Apple Valley-Eagan Public Schools

dustin.dorey at district196.org

651|423|7971

 

From: John McLaughlin [mailto:John_McLaughlin at newton.k12.ma.us] 
Sent: Thursday, May 14, 2009 10:27 AM
To: Dorey, Dustin
Cc: Casper List
Subject: Re: [Casper] authenticating..

 

I don't have anything checked there.  I had just changed the
distribution server at the bottom to another server.  Since there is
always something there, how do you revert a change like that?

 

John McLaughlin

Technical Support Specialist

Newton Public Schools

 

"Dorey, Dustin" <Dustin.Dorey at district196.org> writes:

Go to your JSS, then select the Admin Tab from there you should be able
to choose Autorun Data (Right side almost all the way down under the
"Mass Edit" heading)

 

In there you should be able to grab whatever group you want (i.e. all
managed computers if you don't want it on any) it will prompt you to
verify them and then after that you can select to change whatever you
want, or simply uncheck everything so there isn't any autorun data.

 

Long story short JSS>Admin>Autorun Data

 

-Dusty-

 

 

 

Dustin  Dorey

Technology Support Cluster Specialist

Independant School District 196

Rosemount-Apple Valley-Eagan Public Schools

dustin.dorey at district196.org

651|423|7971

 

 

From: casper-bounces at list.jamfsoftware.com
[mailto:casper-bounces at list.jamfsoftware.com] On Behalf Of John
McLaughlin

Sent: Thursday, May 14, 2009 9:12 AM

To: Casper List

Subject: [Casper] authenticating..





 

 

I am no longer prompted upon NetBoot for AD authentication to use Casper
Imaging.  This is a big security issue for us and I desperately need to
remedy this.  How can I mass edit the Autorun data or delete what was
set with it so that staff is prompted for AD authentication when using
Casper Imaging at NetBoot?  Any help is greatly appreciated.  

 

John McLaughlin

Technical Support Specialist

Newton Public Schools

 

 

_______________________________________________

Casper mailing list

Casper at list.jamfsoftware.com

http://list.jamfsoftware.com/mailman/listinfo/casper

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.jamfsoftware.com/pipermail/casper/attachments/20090514/2a52fbe7/attachment.html